[ Pobierz całość w formacie PDF ]
ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
MAZDA 2 04 ’! DIESEL
’!
MAKE MOD. YEAR
ALARM/SIREN Position the compact alarms and the sirens on the support of the shock absorber, driver s
side.
POSITION
Pass the cables using the original fairlead located on the right of the servobrake.
CENTRAL UNIT POSITION
Position the modular sistems and the modules under the dashboard, driver s side.
POWER SUPPLY +30: connect directly to the positive facilities supply wire coming out of the battery.
-31: connect directly to a ground terminal behind the driver s side bulkhead.
IGNITION WIRE +15/54: connect to the BLACK/YELLOW wire in the wiring harness coming out of a multiway
connector, in the fuse box.
DIRECTION INDICATORS Connect to the GREEN/BLACK and GREEN/WHITE wire, in the 8 way white connector of the
direction indicators white relay, located on the right of the fuse box, under the dashboard
driver s side.
ELECTRIC WINDOWS Positive control signal
Front window, driver s side:
cut the RED/BLACK wire on the push-button panel inside the driver s side door.
Front window, passenger s side:
cut the GREEN/WHITE wire on the push-button panel inside the driver s side door.
CENTRAL DOORS LOCKING Negative control signal
Connect to the ORANGE wire (lock) and to the GREEN wire (unlock) in the 24 way connector,
behind the driver s side sill cover.
IMMOBILISATION POINT Fuel pump
Cut the BLACK/WHITE wire in a multiway connector, in the fuse box.
STARTER +50: Cut the RED wire located in the wiring harness coming out of the connector of the ignition
key.
BONNET SWITCH Install an additional switch on the headlamp support plate, driver s side.
DOORS AND BOOT Connect to the BLACK/RED wire in the bundle of cables behind the driver s side sill cover.
SWITCHES
ma204gbb.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual. [ Pobierz całość w formacie PDF ]
zanotowane.pl doc.pisz.pl pdf.pisz.pl fopke.keep.pl
ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
MAZDA 2 04 ’! DIESEL
’!
MAKE MOD. YEAR
ALARM/SIREN Position the compact alarms and the sirens on the support of the shock absorber, driver s
side.
POSITION
Pass the cables using the original fairlead located on the right of the servobrake.
CENTRAL UNIT POSITION
Position the modular sistems and the modules under the dashboard, driver s side.
POWER SUPPLY +30: connect directly to the positive facilities supply wire coming out of the battery.
-31: connect directly to a ground terminal behind the driver s side bulkhead.
IGNITION WIRE +15/54: connect to the BLACK/YELLOW wire in the wiring harness coming out of a multiway
connector, in the fuse box.
DIRECTION INDICATORS Connect to the GREEN/BLACK and GREEN/WHITE wire, in the 8 way white connector of the
direction indicators white relay, located on the right of the fuse box, under the dashboard
driver s side.
ELECTRIC WINDOWS Positive control signal
Front window, driver s side:
cut the RED/BLACK wire on the push-button panel inside the driver s side door.
Front window, passenger s side:
cut the GREEN/WHITE wire on the push-button panel inside the driver s side door.
CENTRAL DOORS LOCKING Negative control signal
Connect to the ORANGE wire (lock) and to the GREEN wire (unlock) in the 24 way connector,
behind the driver s side sill cover.
IMMOBILISATION POINT Fuel pump
Cut the BLACK/WHITE wire in a multiway connector, in the fuse box.
STARTER +50: Cut the RED wire located in the wiring harness coming out of the connector of the ignition
key.
BONNET SWITCH Install an additional switch on the headlamp support plate, driver s side.
DOORS AND BOOT Connect to the BLACK/RED wire in the bundle of cables behind the driver s side sill cover.
SWITCHES
ma204gbb.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual. [ Pobierz całość w formacie PDF ]